不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果，以除尘效率和系统阻力为参照，选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计，在特定参数条件下，2种喷雾方式的因素影响排序相同，除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量；系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量；径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板；轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板；在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

常州市裸露地面风蚀扬尘排放清单及分布特征研究

以2014年为基准年,以常州市行政边界为研究区域,利用卫星遥感解译的土地利用类型和裸土面积信息,并通过国土、气象等部门提供的土壤类型、气象因子等相关资料获取本地化因子和参数,估算常州市行政区域内裸露地面土壤扬尘中颗粒物的年排放量。结果表明:常州市裸露地面主要分布在金坛市、溧阳市和武进区,市中心区域最少,裸露土地利用类型主要为农田、滩涂、裸露山体、荒地及未硬化或未绿化的空地等;2014年常州市行政区域内裸露地面风蚀扬尘中TSP、PM 10、PM 2.5的年排放量分别为62.66 t、5.63 t、0.24 t,其中,金坛市土壤起尘量最大,其次为武进区,再次为新北区、溧阳市,市中心区域土壤扬尘最少。     

关于锅炉烟气脱硫除尘技术的探讨

目前国内能源结构仍以煤炭为主,大气污染非常的严重,尤其是酸雨和粉尘危害相对较大。在生态文明建设的时代背景下,我们应当加强锅炉脱硫以及除尘技术创新与改造,对燃煤烟尘以及二氧化硫等污染物的排放进行严格控制。本文先对锅炉烟气脱硫除尘现状进行了分析,并在此基础上就电厂锅炉如何进行烟气脱硫与除尘提出了一些观点与认识,以供参考。     

300MW燃煤锅炉机组超细颗粒聚并器的实验研究

为了解决燃煤锅炉烟气中超细颗粒难以脱除的问题,基于流体动力学原理设计了一种超细颗粒聚并器,并在300 MW燃煤锅炉机组电除尘器的前置烟道中进行了实验研究。结果表明,聚并器内部存在超细颗粒之间以及超细颗粒与大颗粒之间的相互聚集行为,从而使超细颗粒数量显著减少。例如,对于粒径在2.65和10.48μm以下的颗粒,其体积比例在聚并器出口分别减少了56.7%和62.3%,在电除尘器出口的粉尘浓度减少了26.34 mg/Nm3,这表明,基于流体动力学原理的聚并器对超细颗粒的聚并作用明显,具有良好的应用前景。     

浙江省工业烟粉尘总量控制研究

通过对浙江省工业烟粉尘排放总量和排放源现状进行分析,提出工业烟粉尘减排治理对策,对工业烟粉尘4个重点行业(水泥制造行业、火力发电行业、钢铁行业(包括炼钢、钢压延加工和黑色金属铸造行业)、纺织染整行业(包括棉印染精加工、化纤织物染整精加工和棉织造加工行业)排放源的烟粉尘减排途径和潜力进行分析测算,研究提出工业烟粉尘总量控制措施和建议。     

环境磁学在城市地表灰尘重金属污染研究中的应用

随着环境问题日渐突出,地表灰尘重金属污染日益成为研究热点。单纯采用化学方法监测重金属污染具有一定局限性,环境磁学方法以其简便、快捷、经济且无害化的特点在城市重金属污染研究中广为应用。通过文献调研,综述环境磁学在城市地表灰尘重金属污染研究中的应用与研究进展,阐明重金属的主要来源,简述环境磁学的诸多参数,分析磁学参数与重金属的关系,并通过对比不同的磁学分析方法,探讨环境磁学方法在城市地表灰尘重金属污染研究中存在的问题及其发展趋势。     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

防风抑尘网设计要点及参数的确定

介绍了堆场起尘、防风抑尘网抑尘的机理和国内外防风抑尘网研究结果,结合实际工程设计的经验,分析了防风抑尘网设计要点和主要参数,提出防风抑尘网设计的意见和建议。     

大气颗粒物及降尘中重金属的分布特征与人体健康风险评价

为了解PM_(2.5)、PM_(10)和降尘中Cu、Mn、Pb、Ti、V、Cd、Cr、Co、Mo、Ni等10种重金属元素的分布特征及人体健康风险,利用大流量颗粒物采样器采集了北京城区某地四季大气中PM_(2.5)、PM_(10)及降尘样品,用ICP-MS测定了上述10种金属元素的质量浓度.结果表明,PM_(2.5)和PM_(10)的年均质量浓度分别为153.40μg·m~(-3)和232.93μg·m~(-3),超出GB 3095-2012中二类环境功能区标准限值的5倍和3倍;PM_(2.5)/PM_(10)的均值为0.74,表明大气颗粒物中以粒径小于2.5μm的颗粒为主;后向轨迹分析结果表明外源颗粒物的来向随季节变化而改变,冬、春、夏、秋季主要来向为西北、北-东北、东南、东南-西北.PM_(2.5)和PM_(10)中10种元素的年均质量浓度从高到低依次为TiMnPbCuCrNiVCdMoCo,其中Ti、Mn、Pb、Cu和Cr这5种元素占10种目标元素总质量浓度的91.93%和92.49%.除PM_(10)中Cd年均质量浓度(6.53 ng·m~(-3))高于GB 3095-2012限定值(5.00 ng·m~(-3))外,其他元素的质量浓度均不超标.降尘中各元素的含量由高到低依次为TiMnPbCuNiCrVCoMoCd,Ti(2561.48μg·g~(-1))占所有元素的质量分数为72.57%,地累积指数(Igeo)结果表明,Cd(4.03)属重度污染,Pb(2.49)介于中度污染和重度污染之间,Cu(1.33)属中度污染,Ni(0.43)属轻微污染.重金属的致癌健康风险(10-4)和非致癌健康风险(1),均处于较低水平,短期内不会对人体健康造成威胁,但不能忽视长期处于此环境所带来的健康危害.